The right internal fittings turn wasted cupboard space into genuinely usable storage — a pull-out larder that puts every jar within reach, a corner carousel that finally uses the dead space behind the door, or a soft-close cutlery drawer that just works. We specify and fit German-engineered Häfele and Vauth-Sagel storage systems across every kitchen we build in London.
Tell us about your kitchen and we'll recommend the accessories that make the biggest difference, with an itemised quote within 24 hours.
Every cupboard in a kitchen has an opportunity hiding in it — a larder that swallows a whole shopping trip, a corner that finally gives up its dead space, a drawer that keeps cutlery from turning into a drawer full of clutter. Explore the six directions below to find the right fit for your kitchen.
Most Popular
A full-height pull-out larder brings every basket to you instead of you reaching into the back of a dark cupboard. Choose mesh wire, linear wire or solid-base Premea baskets, with optional glass sides for a designer look.
Dead-Space Solver
Corner cupboards lose more usable space than any other unit in the kitchen. Carousels, magic corners and pole-free swing-out systems reclaim almost all of it, bringing contents fully into reach.
Everyday Essential
Narrow gap fillers, K-line pull-outs, and cutlery and utensil organisers turn awkward base cabinet widths into genuinely useful storage for oils, spices, chopping boards and everyday tools.
Reach Every Shelf
Pull-down mechanisms bring high wall cupboards within easy reach, while sprung drawer organisers keep everything from spice jars to serving trays sorted and visible at a glance.
Hidden & Sorted
Multi-compartment pull-out bins keep recycling sorted and out of sight, while integrated laundry carriers and cleaning caddies turn utility cupboards into properly organised space.
Finishing Touches
The smaller details that make a kitchen feel finished — wine racks, spice racks, towel rails, chopping board holders and discreet in-cabinet USB power modules for charging on the worktop.
Browse a genuine spread of larder, corner, base and drawer storage fittings we specify across our kitchens. Filter by the category that matters most to you.
There's no single "must-have" accessory — the right combination depends on your cupboard sizes, cooking habits and budget. Here's our honest, experience-based comparison of the main categories.
| Consideration | Larder Units | Corner Storage | Base Pull-Outs | Waste & Recycling |
|---|---|---|---|---|
| Best Cabinet Type | 300–600mm wide, floor to ceiling |
Needs min. 800–900mm cabinet |
150mm and up |
Min. 400–500mm width |
| Typical Budget Tier | ££ (Mid) £280 – £650 |
£££ (Mid-High) £220 – £900 |
£ (Budget) £95 – £320 |
££ (Mid) £140 – £380 |
| Installation Complexity | Cabinet-specific, height adjustable |
Needs precise door/hinge alignment |
Slides into existing base carcass |
Fits standard base cabinet |
| Best Suited For | Households with large weekly shops & bulk storage needs | Kitchens with an L-shaped or corner run of cabinetry | Everyday oils, spices & utensils, narrow leftover gaps | Every kitchen — council recycling compliance & tidiness |
Internal fittings are only as good as the cabinet they're specified for. Here's what our designers check before recommending any accessory.
Most pull-out and larder fittings are sold to match standard 150, 300, 400, 500 and 600mm cabinet widths, but internal clearance varies with hinge type and door thickness — always measured against the actual carcass, never assumed.
A larder basket loaded with tins and jars can easily reach 15–25kg. Look for ball-bearing full-extension runners rated to the load, not just soft-close branding — cheaper runners sag and stick within a year or two.
Corner carousels and swing-out mechanisms often need a wider-opening hinge (typically 90–170°) to clear fully. This should be specified at the cabinet-ordering stage, not retrofitted afterwards.
Many base and drawer accessories can be retrofitted into existing cabinetry. Full-height larders, rotary units and corner carousels are far easier — and cheaper — to specify at the point of ordering new cabinets.
Most London boroughs now require separated food waste, recycling and general waste. We size waste and recycling pull-outs against your local council's collection categories, not a generic two-bin assumption.
Premea solid-base baskets can take optional clear or frosted Glassline glass side panels for a designer look. These are ordered separately from the basket set, so worth confirming at the design stage if you want that finish.
Every accessory starts with an honest look at how you actually use your kitchen. Here's how our London design and fitting team takes it from planning to installation.
We visit or video-call to understand your cupboard layout, cooking habits and pain points, then talk through which accessories will actually earn their place in your kitchen.
We match every fitting to your exact cabinet widths, hinge angles and door clearances, then provide an itemised, no-surprises quote for the full storage package.
German-engineered fittings are ordered against your confirmed cabinet schedule, so mechanisms, baskets and runners all arrive matched to the exact units they're going into.
Our fitting team installs and adjusts every mechanism for smooth, soft-close operation, then walks you through how each accessory works before we consider the job complete.
The questions we're asked most often when homeowners start planning their kitchen storage.
Visit our London Showroom at 372 Pinner Road, Harrow HA2 6DZ to see larder, corner and drawer accessories working in person, or book a free storage planning consultation online.
GET QUOTE